Power Quality Analyzers and Monitors
Power Quality Analyzers and Monitors
By
Dr. Hedaya Mahmood Alasooly
Hidaia_alassouli@hotmail.com
CONTENTS
Monitoring of Power System Quality
Project done by the Student
Bongani Dlamini
Electrical and Electronic Engineering Department
University of Swaziland
The project examined and corrected by
Dr Hidaia Mahmood Alassouli
ABSTRACT
CONTENTS
1. Abstract
2. Chapter 1 Introduction
3. Chapter 2 Literature Review On Power quality Disturbances
4. Chapter 3- Power Quality Standards
5. Chapter 4 Power Quality Monitoring
6. Chapter 5- Results and Discussion of Results
7. Chapter 6- Conclusion, Recommendations and Future Work
8. References
9. Appendices
ABSTRACT
Power Quality can be defined as the characteristics of the electricity at a given point on an electrical system, evaluated against a set of reference technical parameters. These parameters might relate to the compatibility between electricity supplied on a network and the loads connected to that network.
The voltage waveform is normally distorted, and we have the so called Power Quality disturbances such as; voltage dips/swells, transients, harmonics and voltage unbalance amongst others. The study of Power Quality encompasses the Power Quality disturbances, as well as Power Quality standards, and Power Quality Monitoring.
This project will tackle the subject of Power Quality, Power Quality Disturbances, Power Quality Standards as well as Power Quality Monitoring. A general description of each of the disturbances will be given, and the basic techniques which are used to mitigate that disturbance so as to improve the quality of the supply are presented.
CHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION
1.1 Introducing the research title
Power utilities in every country on the globe have a principal mandate of supplying electrical power to a diverse range of customers. By diverse we mean customers who demand power on varying standards; residential, commercial, as well as industrial. Residential customers normally have a different set of demands in as far as power supplied is concerned, as compared to industry. The common thing on these types of customers is that they call for a disturbance-free supply of electrical power.
Industrial customers can experience interruptions to important processes during momentary sags associated with remote faults on the utility system. Commercial customers are installing high efficiency and electronic office equipment resulting in higher harmonic levels in the buildings. These harmonic sources cause excessive neutral currents and transformer overheating. Even residential customers are concerned about surge protection for sensitive electronics in the house and the impact of momentary interruptions on their electronic equipment.
Noted on the previous paragraph are some of the factors that can disturb the power supplied to the customer. These factors are sags and harmonics. Factors that can cause disturbances to the supply of power are not limited to aforementioned two, but there are a few of them which need attention from power utilities.
As the utility industry undergoes restructuring and all customers find their service needs changing with increased use of equipment and processes more susceptible to power system disturbances, power suppliers and customers will find a solid background in Power Quality (Power Quality) not only useful, but also for continued productivity and competitiveness.
The subject of Power Quality therefore becomes a matter of utmost importance to every power utility that needs to supply an up to standard electrical power to its customers. Power Quality by definition is a set of electrical boundaries that allows equipment to function in its intended manner without significant loss of performance or life expectancy. Perfect Power Quality is characterized by a perfect sinusoidal voltage source without waveform distortion, variation in amplitude or variation in frequency. It is then mandatory for the utility to provide a perfectly sinusoidal voltage source, with constant frequency and amplitude.
There are however factors that can cause deviations from this perfectly sinusoidal voltage source and these are the factors that every power utility should be wary of from time to time. These factors distort the voltage waveform by changing the amplitude or cause deviation in the frequency. To fully comprehend the subject of Power Quality, these factors must be studied and monitored thoroughly, and measures to mitigate them be put in place.
The factors that are a threat to Power Quality are called Power Quality disturbances and are amongst others; voltage dips, voltage flicker, harmonics, frequency variations, voltage swells, over-voltages, under-voltages and transients. A system free from these Power Quality disturbances is what every power supplying utility should strive for in order to have a good quality of supply to its customers.
Swaziland Electricity Company (SEC) being the provider of electrical power in Swaziland is as well striving to supply a distortion-less voltage source to its customers, so she needs to give the subject of Power Quality some utmost attention.
1.2 Problem Statement
In her principal impetus of providing a distortion-less supply of electrical power to its customers, SEC needs to make sure that the Power Quality disturbances are minimized on the network. So a study on Power Quality can go a long way into solving existing Power Quality disturbances as well as problems that may be experienced in the future. The company also needs to do some gap analysis on Power Quality. This gap analysis will help SEC to gauge her stand on Power Quality now, set some goals and find measures that need to be taken to attain those goals.
1.3 Research Objectives
This research has three major objectives:
- Study the subject of power quality and focus on power quality disturbances; their effects on the network, as well the basic techniques used to mitigate them and improve the quality of supply.
- Monitor the power quality disturbances on SEC’s network.
- Compare what literature states on Power Quality with what actually happens on the network.
After the research I intend to come up with some recommendations that if implemented will go a long way in solving SEC’s Power Quality problems now and in the future.
1.4 Hypothesis
An in-depth analysis of data collected from monitoring the network for power quality is vital in making decisions for preventive and corrective maintenance on the network.
1.5 Methodology
The following methodology was carried out for this project:
- Carried out a literature review on the subject of Power Quality, with emphasis on power utilities. The literature review made it possible to be abreast with Power Quality issues from the electrical distributor. This included studying international and local Power Quality standards documents.
- Gathered some data from the SEC’s transmission network for a period of three months from six substations located on the 400kV/132kV/66kV network.
- For the purposes of this report data on Voltage Dips, Voltage Unbalance and Harmonics was of main interest, due to time constraints.
The data analyzed tor this research covers the period from January 2014 to March 2014. Data from this period is data enough to make some informed conclusions on the status of the network, though only daily and weekly variations in Power Quality levels can be identified. With Power Quality being continuously monitored by SEC, there is a great potential for on-going studies to broaden the scope to identifying monthly, seasonal and annual trends in Power Quality levels.
1.6 Thesis Structure
Chapter 1 was the introductory chapter where the research topic was introduced and further unpacked. The motivation to carry out this research in the form of a problem statement is presented. The significance of the study is shown in the research objectives and hypothesis subsections. Then lastly we present the mode of operation that made it possible to write this paper in the methodology section.
In Chapter 2 current literature is reviewed so as to be informed on the three Power Quality parameters of interest on this paper. Each parameter is studied under the sub-headings; definition, causes, effects and mitigating measures.
Power Quality standards are discussed in Chapter 3, local and international standards formulated by accredited world organizations like the IEEE. The measurement and analysis of Power Quality levels is incomplete without reference to specified limits. Established international and local standards exist for the measurement and quantifying of Power Quality data.
The instrumentation requirements for monitoring Power Quality are discussed in Chapter 4. The issues of what should be measured, where and for how long are discussed. The requirements of the instruments used in the Power Quality monitoring are described with reference to relevant standards. Details of the monitoring program at SEC are presented.
Chapter 5 includes the data collected being presented, discussed and analyzed.
The closing chapter includes the overall conclusions of the study, where recommendations are made. Suggestions for future work that is capable of building on this study are included in Chapter 6.
CHAPTER 2 LITERATURE REVIEW ON POWER QUALITY DISTURBANCES
CHAPTER 2 LITERATURE REVIEW ON POWER QUALITY DISTURBANCES
2.1 Introduction
There can be a number of reasons why we need to study power quality, either as power suppliers, or as power consumers. Some of the many a reason is listed below as an introduction to my literature
Impressum
Verlag: BookRix GmbH & Co. KG
Tag der Veröffentlichung: 10.08.2020
ISBN: 978-3-7487-5308-7
Alle Rechte vorbehalten